Automated harmonic analysis

To automatically analyse the effect of time and space harmonics, and automated harmonic analysis is implemented within MANATEE. To run such an analysis in scripting mode, copy/paste tuto_test_SCIM_05 in tuto_test_SCIM_27 and set :

Input.Simu.type_harm_analysis = 1;

This parameter is not available inside the GUI.
The output variable to be observed during the harmonic analysis can be defined as :

Input.Simu.names_resp={'LwrA';'LwrA_max';}

Here the noise level at the nominal speed (LwrA) and the maximal noise level during variable speed (LwrA_max) are considered.

A series of combinatorial simulations is run switching on and off the different harmonic sources. The following results are obtained:

Correlation matrix beetween objectives and variables
Correlation matrix beetween objectives and variables
Effect of harmonic source extinction
Effect of harmonic source extinction

For more information, see how to perform an automated harmonic analysis.

Previous Next