How to set-up Slot Type 29?

Slot type 29 schematics
Slot type 29 schematics

To set up a slot type 29 you need to replace the slot geometry block in your machine file by this code and edit it with your values :

For the stator

Input.Geometry.type_slot_shapes = 29;       

Input.Geometry.H0s = 1e-3; %[m]
Input.Geometry.H1s = 1.5e-3; %[m]
Input.Geometry.H2s = 30e-3; %[m]
Input.Geometry.W0s = 12e-3; %[m]
Input.Geometry.W1s = 14e-3; %[m]
Input.Geometry.W2s = 20e-3; %[m]

For the rotor

Input.Geometry.type_slot_shaper = 29;       

Input.Geometry.H0r = 1e-3; %[m]
Input.Geometry.H1r = 1.5e-3; %[m]
Input.Geometry.H2r = 30e-3; %[m]
Input.Geometry.W0r = 12e-3; %[m]
Input.Geometry.W1r = 14e-3; %[m]
Input.Geometry.W2r = 20e-3; %[m]

Geometrical constraints

Your slot must follow these constraints :

  • W0 <= W1
  • W1 <= W2

Version tracking

Slot type 29 is available starting from MANATEE 1.06.02

Back to slot shape list

Previous Next