How to set-up Slot Type 17?

Slot 17 Schematics
Slot 17 Schematics

To set up a slot type 17 you need to replace the slot geometry bloc in your machine file by this code and edit it with your values :

For the stator

Input.Geometry.type_slot_shapes = 17;       

Input.Geometry.H0s = 1e-3; %[m]
Input.Geometry.H1s = 5e-3; %[m]
Input.Geometry.H2s = 10e-3; %[m]
Input.Geometry.H3s = 50e-3; %[m]
Input.Geometry.W0s = 12e-3; %[rad]
Input.Geometry.W1s = 14e-3; %[m]
Input.Geometry.W2s = 14e-3; %[rad]
Input.Geometry.W3s = 10e-3; %[m]
Input.Geometry.R1s = 5e-3; %[m]

For the rotor

Input.Geometry.type_slot_shaper = 17;       

Input.Geometry.H0r = 1e-3; %[m]
Input.Geometry.H1r = 5e-3; %[m]
Input.Geometry.H2r = 10e-3; %[m]
Input.Geometry.H3r = 50e-3; %[m]
Input.Geometry.W0r = 12e-3; %[rad]
Input.Geometry.W1r = 14e-3; %[m]
Input.Geometry.W2r = 14e-3; %[rad]
Input.Geometry.W3r = 10e-3; %[m]
Input.Geometry.R1r = 5e-3; %[m]

Constraints

Slot 17 is only for external lamination

Version tracking

Slot type 17 is available starting from MANATEE 1.08.01

Back to slot shape list

Previous Next