How to set-up Slot Type 15?

Slot 15 Schematics
Slot 15 Schematics

To set up a slot type 15 you need to replace the slot geometry block in your machine file by this code and edit it with your values :

For the stator

Input.Geometry.type_slot_shapes = 15;       

Input.Geometry.W0s = 5e-3; %[m]
Input.Geometry.W3s = 10e-3; %[m]
Input.Geometry.H0s = 3e-3; %[m]
Input.Geometry.H1s = 7e-3; %[m]
Input.Geometry.H2s = 30e-3; %[m]
Input.Geometry.R1s = 5e-3; %[m]
Input.Geometry.R2s = 3e-3; %[m]

For the rotor

Input.Geometry.type_slot_shaper = 15;       

Input.Geometry.W0r = 5e-3; %[m]
Input.Geometry.W3r = 10e-3; %[m]
Input.Geometry.H0r = 3e-3; %[m]
Input.Geometry.H1r = 7e-3; %[m]
Input.Geometry.H2r = 30e-3; %[m]
Input.Geometry.R1r = 5e-3; %[m]
Input.Geometry.R2r = 3e-3; %[m]

Constraints

Slot 15 can be only used for the outer lamination (the stator if Input.Geometry.is_inner_rotor = 1)

Version tracking

Slot type 15 is available starting from MANATEE 1.06.05

Back to slot shape list

Previous Next