How to impose the equivalent circuit parameters?

Objectives

The article shows how to enforce the Electrical Equivalent Circuit (EEC, also called SPEC like Single Phase Equivalent Circuit) parameters of MANATEE software. The electrical equivalent circuit is a circuit made of resistors and inductors representing the complex transfer function between harmonic voltages and harmonic currents in the machine. It is used to quickly calculate the supply currents and resulting electromagnetic excitation fields, which are then source of magnetic forces and acoustic noise. MANATEE can calculate analytically or numerically these parameters but the user can also enforce the DC value of these parameters at a certain temperature. The modulation of these quantities with temperature and frequency (skin effect factors) are then carried inside MANATEE electrical model.

The equivalent circuit depends on the machine topology. For PMSM MANATEE uses the following circuit:

Basic equivalent circuit of Permanet Magnet Synchronous Machines
Basic equivalent circuit of Permanet Magnet Synchronous Machines
PMSM equivalent circuit input parameters
Description Unit Script syntax
Stator DC phase resistance Ohm Input.Electrical.R10s
Stator phase inductance along d-axis Ohm Input.Electrical.Lmd0
Stator phase inductance along q-axis Ohm Input.Electrical.Lmq0
PM flux linkage Vs Input.Electrical.PhiPM0s
Reference temperature °C Input.Electrical.Tsme0

For SCIM MANATEE uses the following circuit:

Basic equivalent circuit of Squirrel Cage Induction Machines (fundamental frequency, with iron loss)
Basic equivalent circuit of Squirrel Cage Induction Machines (fundamental frequency, with iron loss)
SCIM equivalent circuit input parameters
Description Unit Script syntax
Stator DC phase resistance Ohm Input.Electrical.R10s
Rotor DC phase resistance Ohm Input.Electrical.R20s
Stator phase leakage inductance Ohm Input.Electrical.L10s
Rotor phase leakage inductance Ohm Input.Electrical.L20s
Magnetizing inductance H Input.Electrical.Lm0s
Reference temperature °C Input.Electrical.Tsme0

GUI implementation

To be completed.

Scripting implementation

To impose the equivalent circuit parameters one must define in the simulation script Input.Simu.is_forceSPEC = 1; The values from the machine script are then automatically used.

Previous Next