19.01.18 Free Technical Workshop on the vibro-acoustic design of electrical machines in Germany

EOMYS organized a free technical workshop on the vibro-acoustic design of electrical machines focusing on acoustic noise and vibrations due to Maxwell forces in Permanent Magnet Synchronous Machines (PMSM). This event is the opportunity to get a one-day technical training on electromagnetically-excited noise and vibrations, and to learn how to use MANATEE software for the vibroacoustic design of electrical machines in early design phase (from basic magnetic circuit dimensions) as well as in detailed design phase (from detailed structural CAD model).

The workshop was held on Friday 13th of April, 2018 in Darmstadt, Germany (after the 11th International Symposium on Electric and Magnetic Fields, EMF 2018) from 8:30 to 16:00.

The presentation of the Technical Workshop can be found in the e-NVH conference section.

Read more

  • Manatee V2.1 webinar (July 21)
    The new version of Manatee software, specialized in assessing electromagnetic noise and vibrations throughout the electrical system development lifecycle, has been demonstrated in a webinar on July 8. The replay is accessible on our Youtube  (...)
  • ITEC 2021 (June 21)
    Jean LE BESNERAIS will participate in the ITEC 2021, conference held online from June 21-25, with a 2h30 course entitled "e-NVH of Electric Traction Motors: Focus on Physics of Noise and Vibration Due to Magnetic Forces." The pre-recorded course  (...)
  • Manatee V2.1 webinar (June 21)
    EOMYS presents the latest version of Manatee software, V2.1, during a short free webinar on July 8. Although this new version focuses on mechanical engineering, keep in mind that Manatee software is made for all engineers involved in NVH design  (...)